10 Important Things to Check Before Riding an Electric Scooter
The joy of riding an electric scooter is contagious. But the thrill of moving quickly and quietly through the city also comes with responsibility. Just as a pilot checks the aircraft before a flight, a responsible scooter rider should adopt a short, one-minute routine that keeps them safe and their machine reliable.
These 10 quick checks will take you less than two minutes, but can save you weeks of trouble. Make them a habit before every ride.
1. Brakes (static test)
Brake failure is one of the most dangerous situations.
- How to do it: Stand next to the scooter and squeeze the brake levers a few times. They should offer reasonable resistance and must not touch the handlebars. If the brakes feel "soft" or respond weakly, don't even think about riding.
2. Brakes (low-speed test)
A static test may not reveal everything. Checking that they work while moving is crucial.
- How to do it: Right after setting off, while you are going very slowly (walking pace), check the brakes again. Brake gently to make sure they respond smoothly and effectively.
3. Tyre pressure
The right pressure is absolutely key for range, safety and comfort.
- How to do it: At least visually check that the tyres don't look soft. Ideally, though, use a pump with a pressure gauge once a week. Under-inflated tyres dramatically reduce range and greatly increase the risk of a puncture.
4. Folding mechanism and handlebars
Play in the handlebars while riding is not only unpleasant but also dangerous.
- How to do it: Grip the handlebars firmly and try to rock them back and forth. You must not feel any play or hear any knocking. Check that the folding mechanism lock is securely engaged.
5. Bolts and nuts
Vibrations while riding can gradually loosen important joints.
- How to do it: Quickly check the main bolts – especially those holding the wheels, brakes and handlebars. If anything seems loose, tighten it before you set off.
6. Battery level
Getting stranded halfway with a flat battery is no fun.
- How to do it: Before setting off, switch the scooter on and check the charge level on the display. Make sure you have enough energy for the whole planned route plus a small reserve.
7. Lights
Even during the day, lights are an important part of making yourself visible to others.
- How to do it: Switch on the front and rear lights and check that both work. Also check the brake light (if your scooter has one) by squeezing the brake lever.
8. A quick visual check
An overall look at the scooter can reveal a problem in its early stages.
- How to do it: Look over the whole scooter. Is there a crack in the frame anywhere? Are any cables sticking out? Is anything loose? This quick check can help you spot damage from your previous ride.
9. Your personal gear
Preparing for a ride doesn't end with the machine.
- How to do it: Do you have your helmet? Do you need glasses against the sun or insects? If you are riding in the evening, are you wearing reflective elements?
10. Don't forget the lock!
The last but important check before leaving home.
- How to do it: If you plan to leave the scooter unattended anywhere, check that you have a good lock with you. A scooter without a lock is easy prey for thieves.
This simple ritual shows responsibility towards yourself and other road users. It is the best investment in a safe, trouble-free ride.