Blog

Chain Lubrication in Summer: A Practical Step-by-Step Guide

11.06.2026 • Admin • 5 min read
Chain Lubrication in Summer: A Practical Step-by-Step Guide

Summer is when you ride the most kilometres – and that's exactly when your chain suffers most. Dry dust from farm tracks sticks to the lube and grinds the whole drivetrain like sandpaper. We'll show you how to lubricate your chain properly, how often to do it and which mistakes to avoid so your drivetrain lasts as long as possible.


Why summer is the hardest season for your chain

In winter you ride less and the main threat is moisture and salt. In summer it's the other way round: you ride thousands of kilometres and the biggest enemy is dust. It sticks to the lube and forms a grinding paste that gradually wears down your chain, chainring and cassette. The result? A drivetrain that skips, makes noise and needs replacing after a few seasons.

The good news is that a few minutes of maintenance after every longer or dusty ride is enough. You don't need a workshop or expensive tools.

What to lubricate a bike chain with: dry or wet lube?

This is the decision that makes the biggest difference in summer.

Dry lube is ideal for summer. It dries on the chain into a thin layer that attracts less dust. The downside is that it washes off more quickly – after riding in the rain it needs reapplying.

Wet lube lasts longer and resists water better, but on dry farm tracks it acts like a dust trap. In summer, save it for damp days or long rides with a risk of rain.

If you mostly ride in dry conditions and on gravel routes, go for dry lube. You'll save yourself half the dirt. And watch out – WD-40 is not a chain lube (we explain below).

How to lubricate a chain step by step

You lubricate a chain in three steps: first you clean it, then you apply oil one drop per link, and finally you wipe off the excess. Here is each step in detail.

1. Clean it first

There's no point lubricating a dirty chain – you'll just work the dust inside. First wipe the chain with a dry rag while slowly turning the cranks backwards. If the chain is very dirty, use a degreaser or chain cleaner and let it dry thoroughly.

2. Apply the lube

Apply the oil one drop per link while slowly turning the cranks backwards. The goal is to get the lube inside to the pins, not to spread it over the surface.

3. Let it soak in and wipe off the excess

After applying it, let the lube soak in for at least a few minutes (ideally longer with dry lube). Then thoroughly wipe off the excess with a dry rag. This is the step most people skip – and yet it is the most important. The lube should be inside the chain, not on the outside. A greasy surface just collects dust unnecessarily.

The three most common mistakes

Too much lube. A shiny, wet chain isn't well lubricated – it's just clogged. Less is more.

WD-40 as a lube. WD-40 is a degreaser and penetrating spray, not a chain lube. You can clean with it, but not lubricate – it dries out the pins and the chain will run dry.

Lubricating over dirt. If you skip cleaning, the dust stays in the chain and the lube just seals it inside.

How often to lubricate your chain

There's no universal number – go by the conditions. As a guide:

  • After every ride in the rain or mud.
  • After roughly every 100–150 km in dry conditions.
  • Whenever the chain starts to rasp or squeak dryly.

Your ears are a good indicator. A dry chain makes itself heard before you see it.

Bonus: check chain wear

Over time a chain "stretches", and a worn chain destroys the chainring and cassette. The cheapest insurance is a chain wear checker – a small tool costing a few euros. If you place it on the chain and it drops in, it's time to replace the chain. Replacing it in time will save you a much more expensive replacement of the whole drivetrain.


Summary: in summer, go for dry lube, always lubricate a clean chain, wipe off the excess and keep an eye on wear. A few minutes after a ride will extend the life of your whole drivetrain by seasons.

Frequently asked questions

What should I lubricate my bike chain with? A dedicated chain oil. In summer and dry conditions choose a dry lube that attracts less dust; on damp days a wet lube. Don't use WD-40 – it's a degreaser, not a lubricant.

How often should I lubricate my chain? After every ride in rain or mud, otherwise roughly every 100–150 km in the dry – and whenever the chain starts to rasp.

Can I use WD-40 on my chain? For cleaning, yes; for lubricating, no. WD-40 dries out the pins and the chain will run dry. After cleaning, always apply a real chain oil.