Riding an Electric Scooter in the Rain: A Survival Guide for Wet Roads
Rain is a natural part of our climate, but for someone riding an electric scooter it is one of the biggest challenges. Wet roads, reduced visibility and the unpredictable behaviour of other road users turn an ordinary ride into a risky mission.
The basic rule is: if you don't have to, don't ride in the rain. But if the rain catches you unexpectedly or the ride is unavoidable, the right technique and preparation are key to getting home safely. This guide is intended for experienced riders who understand the risks.
Phase 1: preparing to ride in the rain
Before heading out onto wet roads, spend a few minutes preparing thoroughly.
- Tyres are the foundation: Check that your tyres have enough tread depth to channel water away. Most important of all, though, is the right pressure. Slightly under-inflated tyres (a few PSI below usual) can increase the contact patch with the road and improve grip. Don't overdo it, though, so you don't risk a puncture.
- Brakes at 110%: Wet brakes take longer to bite and are less effective. Make sure they are in perfect condition and respond instantly.
- Be a beacon: Switch on all your lights, even during the day. Consider a flashing rear light for even better visibility.
- Suitable clothing: A waterproof jacket and trousers go without saying. Shoes with non-slip soles are crucial, though, so you have a secure footing if you need to put a foot down.
- Eye protection: Wear glasses with clear or yellow lenses. They stop raindrops and spray from cars hitting you straight in the eyes.
Phase 2: riding technique on wet surfaces
Forget speed and aggression. Smoothness and caution are your new best friends.
1. Cut your speed drastically
This is the most important rule. Ride at no more than half your usual speed. This gives you twice as much time to react and significantly reduces the risk of skidding.
2. Brake gently and early
- Braking distance increases: On a wet surface the braking distance can double. Start braking much earlier than usual.
- Gentle modulation: Brake smoothly and intermittently. Squeezing the brake hard can instantly lock the wheel and cause a skid.
- Favour the rear brake: Put most of the braking force through the rear brake. Braking too hard with the front brake on a slippery surface is the most common cause of falls.
3. Take corners in wide arcs
Sharp, fast corners are a no-go on a wet road.
- Slow down before the corner: Never brake in a corner. Adjust your speed before it.
- A wide arc: Take corners in the widest arc possible.
- No sharp leaning: Instead of leaning your body, rely more on gentle steering.
4. Watch out for invisible traps
A wet road is full of hazards that aren't a problem in the dry.
- Puddles: Avoid them at all costs. You never know whether a deep pothole is hiding under the surface.
- Metal surfaces and road markings: Manhole covers, tram rails and white road markings (crossings, lane lines) are as slippery as ice when wet. Cross them as perpendicularly as possible and without braking or turning.
- Wet leaves: In autumn, wet leaves form an extremely slippery layer. They behave much like snow.
Phase 3: care after the ride
When you reach your destination, your work isn't over.
- Dry the scooter thoroughly: Wipe down the whole scooter, especially the handlebars, brakes, folding mechanism and the area around the battery and motor. This prevents corrosion.
- Clean it: Mud and dirt hold moisture. Clean the moving parts in particular.
- Keep the battery safe: Never charge a wet scooter. Before plugging it into the charger, make sure it is completely dry, especially the charging port.
Riding in the rain demands respect and maximum concentration. If you aren't one hundred per cent sure of your abilities and the condition of your scooter, the safest choice is to leave it at home.